Skate Sizing


Choosing the correct skate size is a very important task and usually even more important than choosing the skate model! All high-quality skates will have a break-in period and will adjust over time to the skater’s feet. Some will take longer and some shorter, but while you want to have a comfortable ride you do not want to have the skates too loose… The correct fit will determine much more than just the comfort - it will define how much control, power transfer, and agility you would have while skating, and even would affect the balance.

Please remember that the skates will feel the worst when you try them for the first time and from there the fit will only improve!!!

While various skating styles and skaters themselves have different preferences, below are the general instructions on how to determine the perfect fit for your new skates.

WHAT SIZE SHOULD I CHOOSE?

Most inline and roller skates are manufactured and sold in European sizes (EU), so your US / UK sizing could be a wrong idea to use due to conversion inaccuracies. Furthermore, even if you know your European sizing, every shoe and skate manufacturer has a slightly different fit and sizing, therefore your standard shoe size might not assure a perfect fit but that is the best way to estimate your skate size. In any case, the inline and roller skate size should be either equal to your shoe size or no more than one size up or down from it.

Based on our experience, the best way to determine your skate size is to take a look at your current pair of skates and/or running shoe labels for MM / CM / MP / MONDO numbers. These numbers are indicating the maximum foot length that will fit into the pair, while MM shows the measurement in millimeters and CM/MP/MONDO is centimeters. Having these numbers along with the EU sizes from these shoes, you will be able to determine the size of the skates that you need by looking into the brand or model-specific sizing chart (usually located in the Sizing tab under the skates photos or as one of the product photos). If cannot be located, please send us an inquiry and we gladly will help you out!

Important: Many shops are recommending measuring your feet to determine your skate size, but we have found that this leads to too many mistakes and do not recommend that. If after following the instructions above you are finding yourself stuck in between two sizes, you could measure your feet according to the directions below. In this case, your shoe size is still the defining factor, so if the measurement is showing more than one size up or down, something is wrong with the measurement! If your foot is wider than average, please go one size up. Usually, Seba, FR, and Adapt skates fit wider than average, Powerslide and K2 average, Flying Eagle and Rollerblade average to narrow...

Still, want to measure your feet? Here is how to do it:

You’ll need paper, a pen, a flat wall, and, if possible, a buddy to help. It’s best to measure your feet later in the day after you have been on them for a few hours to account for swelling.
Find a hard floor with a flat wall. Tape a piece of paper down so that it touches the wall. Stand on the paper in bare feet, with your heel just touching the wall.
Have your friend take a book and place it so that it just touches the tip of your longest toe. Mark the spot where the book meets your toe. Do this with both feet and use the larger of the two measurements. Measure your foot length in millimeters, if possible. If you measure in inches, be sure to measure in 16ths of an inch.
Choose your size from the manufacturer's sizing chart. The “Max Foot Length” is the longest foot measurement that will fit into that size. The US Men’s column lists the sizes found on the box.

Here is a great sizing video courtesy of Powerslide:

https://youtu.be/G6X4X5K93XU?si=TCY2d6KWGuz0o6HH

 

SIZING FOR CONTROL OVER COMFORT

Our sizing advice is targeted at freestyle or dance skater who wants a very snug fit in their skate to enjoy maximum control. Our instructions will give a fit that prioritizes control over comfort. If comfort is a higher priority, or if you have an especially wide or oddly shaped foot, you may do well to choose a slightly larger size. If you are near the boundary between two sizes, you would probably be better off going with the larger size in case you prefer comfort over control.

Notes about Width
In general, the Plastic Boot skates with a built-in liner have a narrower fit through the foot, while the boots with a removable liner and soft boots have a somewhat wider fit. The Carbon is a bit wider through the toe box than the plastic boot skates because the carbon fiber boot has less flex. As a rule of thumb, skates with built-in liners and "regular" liners will have less adjustment room.

We gladly will guide you in case you have any further questions. Email us at [email protected]

To help you better, please include all the sizing information off one or two pairs of skates or running shoes that you currently have including EU/US/UK/MP/CM/MM/MONDO, etc...


Rollerblade Blank Team Aggressive Inline Skates

MX$5,489.99

The Rollerblade Blank Team Aggressive Inline Skates are made for street or park skating for those looking for a high-quality shredding experience. Designed and tested by the Blank Pro team, this skate is ready for anything. The Blank shell provides support to the foot and ankle for high impacts and technical grinding. The Direct Mount soul plates allow better balance, skating control, and a better grinding feel.

The Blank liner takes comfort to the next level with strategic padding, a stretch toe box, and integration with the boot shell. The Blank UFS frames are set up to grind and deal with the demands of street and park skating. The uniquely designed frame walls are curved to reduce friction while providing a fast roll with 60mm wheels. Hydrogen wheels and Twincam bearings ensure the skate rolls smoothly and fast. Make the streets your blank canvas.

Free contiguous US/Canada shipping on orders over $99

  • Easy 60-days Returns/Exchange – Unused products. Conditions apply.
  • Worldwide support – We’re here to help.
100% Secure Checkout
Major Credit Cards / PayPal

Size Guide

Rollerblade Blank Team Aggressive Inline Skates are perfect for Aggressive Street and Park skating

  • Boot/Shell: Blank shell and soleplate incorporate durability, style, and function. The boot has an anatomical design, improved cuff wrap, and easy open/close function with the buckle. The shell integrates with the direct mount soul plate allowing the frame to mount directly to the boot shell.
  • Frames: Blank UFS incorporates a lower H-Block for versatile skating and durability. The H-Block is designed to work with flat-rocker or anti-rocker grind wheels.
  • Wheels: Hydrogen 60mm/92A made in USA with proprietary urethane formula for ultimate performance, less vibration, and excellent wear, set up with 42mm plastic anti-rocker wheels in the 2nd and 3rd wheel positions.
  • Bearings: Twincam ILQ 9 Classic Plus
  • Performance plus insole and stretch toe box help accommodate the foot’s anatomy for a perfect fit. Rubber outsole adds durability, integrated lacing ensures a precision fit and the silicone strips on the heel help keep the liner in place while skating.
  • Built-in shock under the liner protects heels from the shock of big street skating impacts.

Additional information

Weight 4.5 kg
Size

, , , , , , , , , , , , , , , , ,

Skating Style

Brand

Gender

Wheel Size (mm)

Boot Durability

Boots Comfort

Boots Control

Boots Fit

Setup Speed

Recommended Skill Level

Boot Ventilation

Setup

Rollerblade Sizing Chart

Reviews

There are no reviews yet.

Be the first to review “Rollerblade Blank Team Aggressive Inline Skates”